A carrier that clears a safety check is not necessarily a safe carrier. The record behind the pass or fail tells you where the risk sits, how recent it is, and whether it is getting better or worse.
Most freight procurement teams check a carrier’s safety status the same way: look it up, see a satisfactory rating or no obvious red flags, and move on. That approach catches the worst carriers, but it misses the patterns that matter most. A carrier with a high Unsafe Driving percentile and a clean rating can still be a serious risk to your freight, your drivers, and the public. Reading the record means understanding what each measure tells you.
How FMCSA Scores Carriers: The Safety Measurement System
FMCSA’s Safety Measurement System, or SMS, scores carriers using inspection and crash data. Violations are grouped into seven Behavior Analysis and Safety Improvement Categories, known as BASICs. Each category is scored separately, so a carrier can look fine overall and still be in trouble in one area.
Each BASIC produces a percentile from 0 to 100. A higher percentile means worse performance. A percentile of 75 means the carrier is worse than 75 percent of comparable carriers in that category. Carriers are compared against peers with a similar number of safety events, which means the percentile reflects relative standing, not an absolute measure.
The Seven BASICs
Unsafe Driving. Covers behaviors such as speeding, reckless driving, texting, and improper lane changes. It is one of the most useful predictors of crash risk, and it is a category where a few serious violations can move a score quickly.
Hours-of-Service Compliance. Covers driving beyond permitted hours, logbook violations, and related rest requirements. Fatigue is a persistent factor in serious crashes, so a poor HOS score often signals broader management problems.
Driver Fitness. Covers whether drivers are properly qualified and licensed, including expired medical certificates and operating without the right endorsements. A high score here can point to weak driver qualification processes, which matters directly for identity and credential verification.
Controlled Substances and Alcohol. Covers drug and alcohol program violations and related testing failures. Violations here can be among the most damaging to a carrier’s reputation, and many brokers and shippers treat any substance-related violation as disqualifying.
Vehicle Maintenance. Covers equipment defects, most often brakes, lights, and tires. Brake violations are a leading cause of out-of-service orders, and a high score here usually means the carrier’s preventive maintenance program is not working.
Crash Indicator. Tracks the frequency and severity of crashes involving the carrier. Because it reflects actual outcomes rather than inspection findings, it is one of the most important measures to read closely, including whether crashes were preventable.
Hazardous Materials Compliance. Applies only to carriers that transport hazardous materials. It is not scored for carriers that do not haul hazmat.
Percentiles, Thresholds, and What They Actually Mean
FMCSA sets intervention thresholds for each BASIC. Under the current thresholds for general freight carriers, Unsafe Driving, Hours-of-Service Compliance, and Crash Indicator trigger intervention at the 65th percentile. Vehicle Maintenance, Driver Fitness, and Controlled Substances and Alcohol trigger at the 80th percentile. Thresholds are lower for passenger carriers and vary for hazmat carriers. FMCSA has also proposed threshold changes, so the figures should be confirmed against current guidance before they are used in a decision.
The threshold is not a grade. A carrier above it may receive a warning letter, a targeted inspection, or an investigation. A carrier below it is still being monitored, just without active intervention. Procurement teams should treat the thresholds as the point where FMCSA’s own attention increases, not as the standard for whether a carrier is a good partner.
One detail matters for shippers. FMCSA removed BASIC percentiles and alerts for property carriers from its public website under the FAST Act. Shippers cannot simply look up a carrier’s percentile in a public tool. Access depends on registration with FMCSA or on a platform that surfaces the data, and the data should be pulled directly rather than taken from a secondhand summary.
Satisfactory Ratings: Useful, but Not Enough
FMCSA can assign a safety rating after a compliance review. The main ratings are Satisfactory, Conditional, and Unsatisfactory. A Satisfactory rating means the review found the carrier’s safety management controls adequate. Many carriers, especially newer or smaller ones, have no rating at all, which is a different situation from a poor one.
The rating is a snapshot from the last review, not a continuous measure. A carrier can hold a Satisfactory rating for years while its inspection and crash data deteriorate. That is why the rating should be read alongside the BASIC percentiles and the crash history, not in place of them. Unrated carriers call for more scrutiny, not automatic rejection, but they also do not have the independent validation a rating provides.
Reading the Crash History
Crash data is where a record stops being abstract. Look at the number of crashes in the past two years, whether any involved injuries or fatalities, and whether the carrier was found at fault. Preventability matters: a crash caused by another driver tells a different story than one caused by the carrier’s driver. Ask for the carrier’s explanation of each crash, including what occurred, what corrective action was taken, and whether any safety plan changed as a result.
Pattern matters as much as count. Several crashes in the same lane, the same type of event, or the same driver point to a process problem. A single crash with a clear explanation and a documented corrective action may be less concerning than a smaller number of unexplained incidents.
Read the Trend, Not Just the Snapshot
A safety record is a moving picture. Scores update monthly, and each BASIC is driven by violations within a rolling window, with more recent events weighted more heavily. A carrier whose Vehicle Maintenance percentile has climbed for three consecutive months is telling you something, even if the current number is still below threshold. Compare the current record against the previous snapshot, and note the direction of each category, not only its level.
How SCS Applies These Checks to Every Carrier
Our Carrier Qualification and Load Negotiation procedure builds these checks into every carrier relationship. Before a carrier is cleared, we verify its status in Highway and Carrier411, which reviews a carrier’s standing against defined rules. Carriers with a rated status must hold a Satisfactory rating. Our CSA review requires a percentile below 90 percent across the categories our procedure screens.
Any fatal crash in the past two years requires extensive, multi-layered analysis that includes crash reports, police reports, and dashcam footage before potential approval. Any non-fatal crash within the past 12 months requires a full breakdown of what occurred, who was injured if anyone, the corrective action plan, and police reports and dashcam footage where available. Carriers with crashes require compliance approval before booking.
We also recognize that a pass at onboarding does not stay a pass. The same record reviews are repeated as part of our continuous reverification, which covers authority changes, identity alerts, new drivers, and shifts in safety data. For carriers with approved exceptions, safety scores are monitored on an ongoing basis. The goal is to catch deterioration early, while there is still time to act, and to protect our customers’ freight before a problem reaches their dock.
For procurement and logistics teams that want to hold its providers to the same standard, contact us to discuss how our comprehensive managed transportation processes can protect your business.
For a full overview of our carrier management procedure, check out of Carrier Vetting Checklist.




Comments are closed.